AGL  -  Series DataSheet
AGL060  -  IGLOO Low-Power Flash FPGAs, with Flash*Freeze Technology,60k,512,1,536,10,18,4,1k,Yes,1,18,2,96,CS121,QN132,VQ100,5,FG144  -  Actel Corporation  -  Low-Power FPGA

Features and Benefits
Low Power
* 1.2 V to 1.5 V Core Voltage Support for Low Power
* Supports Single-Voltage System Operation
* 5 μW Power Consumption in Flash*Freeze Mode
* Low-Power Active FPGA Operation
* Flash*Freeze Technology Enables Ultra-Low Power Consumption while Maintaining FPGA Content
* Easy Entry to / Exit from Ultra-Low-Power Flash*Freeze Mode
High Capacity
* 15 k to 1 Million System Gates
* Up to 144 kbits of True Dual-Port SRAM
* Up to 300 User I/Os
Reprogrammable Flash Technology
* 130-nm, 7-Layer Metal, Flash-Based CMOS Process
* Live-at-Power-Up (LAPU) Level 0 Support
* Single-Chip Solution
* Retains Programmed Design When Powered Off
In-System Programming (ISP) and Security
* Secure ISP Using On-Chip 128-Bit Advanced Encryption
Standard (AES) Decryption (except ARM -enabled IGLOO
devices) via JTAG (IEEE 1532–compliant)
*FlashLock  to Secure FPGA Contents
High-Performance Routing Hierarchy
* Segmented, Hierarchical Routing and Clock Structure
Advanced I/O
* 700 Mbps DDR, LVDS-Capable I/Os (AGL250 and above)
* 1.2 V, 1.5 V, 1.8 V, 2.5 V, and 3.3 V Mixed-Voltage Operation
* Bank-Selectable I/O Voltages—up to 4 Banks per Chip
* Single-Ended I/O Standards: LVTTL, LVCMOS
3.3V /2.5V / 1.8V /1.5V/1.2 V, 3.3V PCI / 3.3V PCI-X , and LVCMOS 2.5V/5.0V Input
* Differential I/O Standards: LVPECL, LVDS, B-LVDS, and M-LVDS (AGL250 and above)
* Wide Range Power Supply Voltage Support per JESD8-B, Allowing I/Os to Operate from 2.7 V to 3.6 V
* Wide Range Power Supply Voltage Support per JESD8-12, Allowing I/Os to Operate from 1.14 V to 1.575 V
* I/O Registers on Input, Output, and Enable Paths
* Hot-Swappable and Cold-Sparing I/Os
* Programmable Output Slew Rate  and Drive Strength
* Weak Pull-Up/-Down
* IEEE 1149.1 (JTAG) Boundary Scan Test
* Pin-Compatible Packages across the IGLOO Family
Clock Conditioning Circuit (CCC) and PLL
* Six CCC Blocks, One with an Integrated PLL
* Configurable Phase Shift, Multiply/Divide, Delay Capabilities, and External Feedback
* Wide Input Frequency Range (1.5MHz up to 250MHz)
Embedded Memory
* 1 kbit of FlashROM User Nonvolatile Memory
* SRAMs and FIFOs with Variable-Aspect-Ratio 4,608-Bit  RAM Blocks (×1, ×2, ×4, ×9, and ×18 organizations)
* True Dual-Port SRAM (except ×18)
ARM Processor Support in IGLOO FPGAs
* M1 IGLOO Devices—Cortex(TM)-M1 Soft Processor Available with or without Debug