MAX  -  Series DataSheet
MAXQ613  -  16-Bit Microcontroller with Infrared Module  -  Maxim Integrated Products  -  16Bit

General Description
The MAXQ613 is a low-power, 16-bit MAXQ® microcontroller
designed for low-power applications including universal
remote controls, consumer electronics, and white
goods. The device combines a powerful 16-bit RISC
microcontroller and integrated peripherals including a
universal synchronous/asynchronous receiver-transmitter
(USART) and an SPI™ master/slave communications
port, along with an IR module with carrier frequency
generation and flexible port I/O capable of multiplexed
keypad control.
The device includes 48KB of flash program memory and
1.5KB of data SRAM. Intellectual property (IP) protection
is provided by a secure MMU that supports multiple
application privilege levels and protects code against
copying and reverse engineering. Privilege levels enable
vendors to provide libraries and applications to execute
on the device, while limiting access to only data and
code allowed by their privilege level.
For the ultimate in low-power battery-operated performance,
the device includes an ultra-low-power stop
mode (0.2μA typ). In this mode, the minimum amount of
circuitry is powered. Wake-up sources include external
interrupts, the power-fail interrupt, and a timer interrupt.
The microcontroller runs from a wide 1.70V to 3.6V operating
voltage.

Applications
Remote Controls
Battery-Powered
Portable Equipment
Consumer Electronics
Home Appliances
White Goods

Features
S High-Performance, Low-Power, 16-Bit RISC Core
S DC to 12MHz Operation Across Entire Operating Range
S 1.70V to 3.6V Operating Voltage
S 33 Total Instructions for Simplified Programming
S Three Independent Data Pointers Accelerate Data
Movement with Automatic Increment/Decrement
S Dedicated Pointer for Direct Read from Code Space
S 16-Bit Instruction Word, 16-Bit Data Bus
S 16 x 16-Bit General-Purpose Working Registers
S Secure MMU for Application Partitioning and IP
Protection
S Memory Features
48KB Program Flash Memory
512-Byte Sectors
20,000 Erase/Write Cycles per Sector
Masked ROM Available
1.5KB Data SRAM
S Additional Peripherals
Power-Fail Warning
Power-On Reset (POR)/Brownout Reset
Automatic IR Carrier Frequency Generation and
Modulation
Two 16-Bit Programmable Timers/Counters with
Prescaler and Capture/Compare
One SPI and One USART Port
Programmable Watchdog Timer
8kHz Nanopower Ring Oscillator Wake-Up Timer
Up to 24 General-Purpose I/Os
S Low Power Consumption
0.2μA (typ), 2.0μA (max) in Stop Mode,
TA = +25NC, Power-Fail Monitor Disabled
3.25mA (typ) at 12MHz in Active Mode