Related keyword
MC9RS08LE4 Datasheet
MC9RS08LE4 Cross Reference
MC9RS08LE4 Schematic
MC9RS08LE4 Distributor
MC9RS08LE4 Datenblatt
MC9RS08LE4 RoHS
MC9RS08LE4 Equivalent
MC9RS08LE4 Application Notes
MC9RS08LE4 Data Sheet
MC9RS08LE4 component
MC9RS08LE4 Fiche Technique
MC9RS08LE4 Circuit
Features:
• 8-Bit RS08 Central Processor Unit (CPU)
– Up to 20 MHz CPU at 2.7 V to 5.5 V across temperature range of –40°C to 85°C
– Subset of HC08 instruction set with added BGND instructions
• On-Chip Memory
– 4 KB flash memory read/program/erase over full operating voltage and temperature
– 256-byte random-access memory (RAM)
– Security circuitry to prevent unauthorized access to flash memory contents
• Power-Saving Modes
– Wait and stop
• Clock Source Options
– Oscillator (XOSC) — Loop-control Pierce oscillator; crystal or ceramic resonator range of 31.25 kHz to 39.0625 kHz or 1 MHz to 20 MHz
– Internal Clock Source (ICS) — Internal clock source module containing a frequency-locked-loop (FLL) controlled by internal or external reference; precision trimming of internal reference allows 0.2% resolution and 2% deviation over temperature and voltage; supports bus frequencies up to 10 MHz
• System Protection
– Watchdog computer operating properly (COP) reset with option to run from dedicated 1 kHz internal clock source or bus clock
– Low-voltage detection with reset or interrupt
– Selectable trip points
– Illegal opcode detection with reset
– Illegal address detection with reset
– Flash memory block protection
• Development Support
– Single-wire background debug interface
– Breakpoint capability to allow single breakpoint setting during in-circuit debugging
• Peripherals
– LCD — Up to 8 × 14 or 4 × 18 segments; compatible with 5 V or 3 V LCD glass displays using on-chip resistor bias network; functional in wait, stop modes for very low power LCD operation; frontplane and backplane pins multiplexed with GPIO functions; selectable frontplane and backplane configurations
– ADC — 8-channel, 10-bit resolution; 2.5 μs conversion time; automatic compare function; 1.7 mV/°C temperature sensor; internal bandgap reference channel; operation in stop; fully functional from 2.7 V to 5.5 V.
– TPM — Two 2-channel 16-bit timer/pulse-width modulator (TPM) modules; selectable input capture, output compare, or buffered edge- or center-aligned PWM on each channel
– SCI — One serial communications interface module with optional 13-bit break; LIN extensions
– KBI — 8-pin keyborad interrupt module
• Input/Output
– 26 GPIOs including 1 output-only pin and 1 input-only pin
– Hysteresis and configurable pullup device on all input pins; configurable slew rate and drive strength on all output pins
• Package Options
– 28-pin SOIC
Click to view :
MC9RS08LE4.pdf