Free Datasheet Search System

English China
Components,Electronics Parts,integrated circuits,MCU,DSP,FPGA,diodes,triacs, other semiconductors information
Home | Category | Manufacturers List Bookmark and Share

Related keyword

  •   W78E516D Datasheet
  •   W78E516D Cross Reference
  •   W78E516D Schematic
  •   W78E516D Distributor
  •   W78E516D Datenblatt
  •   W78E516D RoHS
  •   W78E516D Equivalent
  •   W78E516D Application Notes
  •   W78E516D Data Sheet
  •   W78E516D component
  •   W78E516D Fiche Technique
  •   W78E516D Circuit
  • W78  -  Series DataSheet
    W78E516D  -  8-bit microcontroller which has an in-system programmable Flash EPROM for on-chip firmware updating  -  Nuvoton Technology Corporation  -  8051


    Description

    The W78E516D/W78E058D series is an 8-bit microcontroller which has an in-system programmable Flash EPROM for on-chip firmware updating.

    The instruction set of the W78E516D/W78E058D is fully compatible with the standard 8052. The W78E516D/W78E058D series contains a 64K/32K bytes of main Flash EPROM and a 4K bytes of auxiliary Flash EPROM which allows the contents of the 64K/32K bytes main Flash EPROM to be updated by the loader program located in the 4K bytes Flash EPROM; a 256 bytes of SRAM; 256 bytes of AUXRAM; four 8-bit bi-directional and bit-addressable I/O ports; an additional 4-bit port P4; three 16-bit timer/counters; a serial port. These peripherals are supported by an 8 sources 2-level interrupt capability. To facilitate programming and verification, the Flash EPROM inside the W78E516D/W78E058D series allows the program memory to be programmed and read electronically. Once the code is confirmed, the user can protect the code for security.

    The W78E516D/W78E058D series microcontroller has two power reduction modes, idle mode and power-down mode, both of which are software selectable. The idle mode turns off the processor clock but allows for continued peripheral operation. The power-down mode stops the crystal oscillator for minimum power consumption. The external clock can be stopped at any time and in any state without affecting the processor.

    Features
    Fully static design 8-bit CMOS microcontroller ( up to 40MHz )
    Optional 12T or 6T mode
    Wide supply voltage of 2.4 to 5.5V
    Max operation frequency up to 40Mhz@12T mode
    64K/32K bytes of in-system programmable FLASH EPROM for Application Program(APROM)
    4K bytes of auxiliary FLASH EPROM for Loader Program(LDROM)
    Low standby current at full supply voltage
    512 bytes of on-chip RAM. (includ e 256 bytes of AUX-RAM, software selectable)
    64K bytes program memory address space and 64K bytes data memory address space
    Four 8-bit bi-directional ports with high sink current for LED driver
    One 4-bit multipurpose programmable port, additional INT2/ INT3
    Support Watch Dog Timer
    Three 16-bit timer/counters
    One full duplex serial port
    8 -sources, 2-level interrupt capability
    Software Reset
    Built-in power management with idle mode and power down mode
    Code protection



    Click to view : W78E516D.pdf   



    我要我IC IC网址大全
    Bookmark Sitemap Contact us
    All Rights Reserved Ic-datasheet-pdf.com 2009-2011
    Valid XHTML 1.0 Transitional